The KIRK Wireless Server 600v3 is ideal for small to medium as well as larger businesses.

The KIRK Wireless Server 600V3 is available with a Cisco Skinny protocol (limited to EMEA and Australia), H.323 protocol and SIP.

The KIRK Wireless Server 600v3 is scalable up to 1500 wireless users. Available as either a single-cell or a multi-cell solution, it can be adjusted to meet exact requirements. The IP interface to the PBX makes it an ideal solution for businesses with several locations. A multi-site solution can be customized with a number of single-cell and multi-cell solutions depending on the size of each individual location. Whenever there is a need for more than one KIRK Wireless Server 600v3 at a location, a primary KIRK Wireless Server 600v3 is needed and the location is considered to be multi-cell.

Up to 256 radio units can be applied to obtain the necessary radio coverage. A single-cell version consists of one KIRK Wireless Server 600v3 and up to 6 KIRK Repeaters. The server runs on an existing LAN.

Features and Benefits

• Single cell up to 35 users and multi-cell Up to 1500 wireless users
• Up to 256 radio units
• Synchronization over the air
• Built-in redundancy
• Power over LAN (P.O.E and Power supply option)
• One RJ45 for 100 Megabit connection to Ethernet
• Browser configured - no additional SW needed
• Provisioning of configuration and firmware

Brochures

KIRK Wireless Server 600V3 Data Sheet
KIRK Wireless Server 600V3 Fact Sheet

Back to Overview